1·Single plane mean bore diameter deviation.
单一平面平均内径偏差。
2·Single plane mean bore diameter deviation.
偏差减为一毫米。
3·Bore diameter variation in a single radial plane.
单一径向平面内径变动量。
4·Thus by a simple machining operation on the face of the moulding the bore diameter is not disturbed.
这样在塑件的平面上作简单的修饰不会影响到塑件的使用。
5·Mean bore diameter: arithmetical mean of the largest and smallest single bore diameters in one plane.
平均内径：同一平面上最大和最小内径的算术平均值。
6·In this way, code NU2308 is obtained for a cylindrical roller bearing with a 40 mm bore diameter (Section 1.6).
用这种方法，获得了NU2308为代码的孔直径40毫米的圆柱滚子轴承(16节)。
7·Small bearings with a bore diameter up to 100 mm can be properly mounted by measuring the lock nut tightening Angle.
孔径最大为100毫米的小型轴承可通过测量锁定螺母的紧固角度正确安装。
8·As the outer bore diameter is larger than the inner one, the filter cartridges have a good deep-level filtering capability.
滤芯过滤孔径外大内小，具有优良的深层过滤效果。
9·In the dimensional plans, several outside diameters and width dimensions are assigned to each bearing bore diameter (Figures 1.761.78 and Table 1.9).
在尺寸方案，几个外径和宽度尺寸被标示为每个轴承孔直径(数字1.761.78和表1.9)。
10·A method of machining to produce the big bore diameter PTFE sifter of the parts for high speed diazo printer was reported, by using polymer PTFE material.
报道了采用新型高分子材料聚四氟乙烯车削板为原料，机械加工生产高速晒图机的重要部件——大孔径聚四氟乙烯筛板的方法。
1·A method of machining to produce the big bore diameter PTFE sifter of the parts for high speed diazo printer was reported, by using polymer PTFE material.
报道了采用新型高分子材料聚四氟乙烯车削板为原料，机械加工生产高速晒图机的重要部件——大孔径聚四氟乙烯筛板的方法。
2·Small bearings with a bore diameter up to 100 mm can be properly mounted by measuring the lock nut tightening Angle.
孔径最大为100毫米的小型轴承可通过测量锁定螺母的紧固角度正确安装。
3·ChinaAbstract:ObjectiveTo observe the effect of the different bore diameter membranes on the parameters of technologies of Lianhua Qingwen Granules and to optimize the process of membrane filtration.
目的在无机陶瓷膜精制连花清瘟颗粒过程中，考察不同孔径的膜对该体系的适用性，并进行膜过程优化设计。